Section Width725 mm (28.5")
Aspect Ratio54%
Rim Diameter13"
Overall Diameter1113 mm (43.8")
Sidewall Height392 mm
Circumference3497 mm
725/54R13 — Buy Tires

Everything to know about the 725/54R13 tire size

Size geometry

A 725/54R13 tire has a 725mm section width and a 54% aspect ratio, mounted on a 13-inch rim. Sidewall height works out to 391.5mm (15.41") and overall outside diameter is 1113.2mm (43.83"). At highway speed the tire completes about 286 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 725/54R13 is unavailable, the closest same-diameter substitutes on the same rim are 715/55R13 and 735/53R13. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 725/54R13 you can upsize to 735/52R14 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 715/57R12 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 725/54R13 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 725/54R13

tire_size.no_vehicles_found