Section Width805 mm (31.7")
Aspect Ratio32%
Rim Diameter10"
Overall Diameter769 mm (30.3")
Sidewall Height258 mm
Circumference2417 mm
805/32R10 — Buy Tires

Everything to know about the 805/32R10 tire size

Size geometry

A 805/32R10 tire has a 805mm section width and a 32% aspect ratio, mounted on a 10-inch rim. Sidewall height works out to 257.6mm (10.14") and overall outside diameter is 769.2mm (30.28"). At highway speed the tire completes about 414 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 805/32R10 is unavailable, the closest same-diameter substitutes on the same rim are 795/32R10 and 815/32R10. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 805/32R10 you can upsize to 815/30R11 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 795/34R9 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 805/32R10 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 805/32R10

tire_size.no_vehicles_found