Section Width825 mm (32.5")
Aspect Ratio52%
Rim Diameter11"
Overall Diameter1137 mm (44.8")
Sidewall Height429 mm
Circumference3573 mm
825/52R11 — Buy Tires

Everything to know about the 825/52R11 tire size

Size geometry

A 825/52R11 tire has a 825mm section width and a 52% aspect ratio, mounted on a 11-inch rim. Sidewall height works out to 429.0mm (16.89") and overall outside diameter is 1137.4mm (44.78"). At highway speed the tire completes about 280 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 825/52R11 is unavailable, the closest same-diameter substitutes on the same rim are 815/53R11 and 835/51R11. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 825/52R11 you can upsize to 835/50R12 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 815/54R10 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 825/52R11 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 825/52R11

tire_size.no_vehicles_found