Section Width895 mm (35.2")
Aspect Ratio27%
Rim Diameter20"
Overall Diameter991 mm (39.0")
Sidewall Height242 mm
Circumference3114 mm
895/27R20 — Buy Tires

Everything to know about the 895/27R20 tire size

Size geometry

A 895/27R20 tire has a 895mm section width and a 27% aspect ratio, mounted on a 20-inch rim. Sidewall height works out to 241.7mm (9.51") and overall outside diameter is 991.3mm (39.03"). At highway speed the tire completes about 321 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 895/27R20 is unavailable, the closest same-diameter substitutes on the same rim are 885/27R20 and 905/27R20. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 895/27R20 you can upsize to 905/25R21 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 885/29R19 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 895/27R20 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 895/27R20

tire_size.no_vehicles_found