Section Width895 mm (35.2")
Aspect Ratio28%
Rim Diameter20"
Overall Diameter1009 mm (39.7")
Sidewall Height251 mm
Circumference3171 mm
895/28R20 — Buy Tires

Everything to know about the 895/28R20 tire size

Size geometry

A 895/28R20 tire has a 895mm section width and a 28% aspect ratio, mounted on a 20-inch rim. Sidewall height works out to 250.6mm (9.87") and overall outside diameter is 1009.2mm (39.73"). At highway speed the tire completes about 315 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 895/28R20 is unavailable, the closest same-diameter substitutes on the same rim are 885/28R20 and 905/28R20. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 895/28R20 you can upsize to 905/26R21 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 885/30R19 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 895/28R20 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 895/28R20

tire_size.no_vehicles_found