Section Width915 mm (36.0")
Aspect Ratio31%
Rim Diameter20"
Overall Diameter1075 mm (42.3")
Sidewall Height284 mm
Circumference3378 mm
915/31R20 — Buy Tires

Everything to know about the 915/31R20 tire size

Size geometry

A 915/31R20 tire has a 915mm section width and a 31% aspect ratio, mounted on a 20-inch rim. Sidewall height works out to 283.6mm (11.17") and overall outside diameter is 1075.3mm (42.33"). At highway speed the tire completes about 296 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 915/31R20 is unavailable, the closest same-diameter substitutes on the same rim are 905/31R20 and 925/31R20. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 915/31R20 you can upsize to 925/29R21 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 905/33R19 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 915/31R20 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 915/31R20

tire_size.no_vehicles_found