2010 Toyota Camry Bolt Pattern & Tire Size
The 2010 Toyota Camry OEM tire size, bolt pattern, and wheel specifications are listed below. All data is based on industry-standard OEM reference specifications.
The 2010 Toyota Camry has a 5x114.3 bolt pattern, an OEM tire size of 215/55R17, and a 60.1mm center bore.
Other years of the Toyota Camry
2010 Toyota Camry Engine & Trim Levels
Detailed tire and wheel breakdown for the 2010 Toyota Camry
Tire geometry â 215/55R17
The 215/55R17 fitted to the 2010 Toyota Camry has a section width of 215mm and an aspect ratio of 55%, mounted on a 17-inch rim. That gives a sidewall height of 118.3mm (4.66") and an overall outside diameter of 668.3mm (26.31"). At highway speed this tire completes roughly 476 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.
Plus-sizing window
If you want to upsize wheels on the 2010 Toyota Camry while keeping the speedometer accurate, target a 225/47R18 (plus-one). For a softer ride or winter setup, a 205/64R16 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.
Wheel fitment specs
The 2010 Toyota Camry uses a 5x114.3 bolt pattern with a 60.1mm hub bore. Safe rim width range for the OEM tire is 6.5J â 7.5J, and offsets in the ET40 â ET50 window will clear suspension and fender without rubbing on most setups.
Tire pressure guidance
Manufacturer-recommended cold tire pressure for the 2010 Toyota Camry is printed on the driver-side door jamb sticker â always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.
OEM Wheel & Tire Specs
Frequently Asked Questions
What tire size does the 2010 Toyota Camry SE use?
The 2010 Toyota Camry SE uses 215/55R17 tires as standard equipment.
What is the bolt pattern of the 2010 Toyota Camry?
The 2010 Toyota Camry has a 5x114.3 bolt pattern with a center bore of 60.1mm.
What is the wheel offset of the 2010 Toyota Camry?
The 2010 Toyota Camry has a wheel offset of ET45.
Other Vehicles with 5x114.3 Bolt Pattern
The following vehicles share the same 5x114.3 bolt pattern as the 2010 Toyota Camry, making wheel interchangeability possible (verify offset and center bore before swapping).