Bolt Pattern5x150
Center Bore110.1
Stud SizeM 14x1.5
Advertisement

Detailed tire and wheel breakdown for the 2011 Toyota Tundra

Tire geometry — 275/65R18

The 275/65R18 fitted to the 2011 Toyota Tundra has a section width of 275mm and an aspect ratio of 65%, mounted on a 18-inch rim. That gives a sidewall height of 178.8mm (7.04") and an overall outside diameter of 814.7mm (32.07"). At highway speed this tire completes roughly 391 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.

Plus-sizing window

If you want to upsize wheels on the 2011 Toyota Tundra while keeping the speedometer accurate, target a 285/58R19 (plus-one). For a softer ride or winter setup, a 265/72R17 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.

Wheel fitment specs

The 2011 Toyota Tundra uses a 5x150 bolt pattern with a 110.1mm hub bore. Safe rim width range for the OEM tire is 7.5J – 8.5J, and offsets in the ET55 – ET65 window will clear suspension and fender without rubbing on most setups.

Tire pressure guidance

Manufacturer-recommended cold tire pressure for the 2011 Toyota Tundra is printed on the driver-side door jamb sticker — always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.

Fitment Specifications

Engine & TrimTire SizeRim SizeOffset (ET)
TRD Pro275/65R1818" x 8.0ET60

Frequently Asked Questions

What tire size does the 2011 Toyota Tundra TRD Pro use?

The 2011 Toyota Tundra TRD Pro uses 275/65R18 tires as standard equipment.

What is the bolt pattern of the 2011 Toyota Tundra TRD Pro?

The 2011 Toyota Tundra TRD Pro has a 5x150 bolt pattern with a center bore of 110.1mm.

What is the wheel offset of the 2011 Toyota Tundra TRD Pro?

The 2011 Toyota Tundra TRD Pro has a wheel offset of ETET60.