2018 Toyota Tundra Bolt Pattern & Tire Size
The 2018 Toyota Tundra OEM tire size, bolt pattern, and wheel specifications are listed below. All data is based on industry-standard OEM reference specifications.
The 2018 Toyota Tundra has a 5x150 bolt pattern, an OEM tire size of 275/65R18, and a 110.1mm center bore.
Other years of the Toyota Tundra
2018 Toyota Tundra Engine & Trim Levels
Detailed tire and wheel breakdown for the 2018 Toyota Tundra
Tire geometry â 275/65R18
The 275/65R18 fitted to the 2018 Toyota Tundra has a section width of 275mm and an aspect ratio of 65%, mounted on a 18-inch rim. That gives a sidewall height of 178.8mm (7.04") and an overall outside diameter of 814.7mm (32.07"). At highway speed this tire completes roughly 391 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.
Plus-sizing window
If you want to upsize wheels on the 2018 Toyota Tundra while keeping the speedometer accurate, target a 285/58R19 (plus-one). For a softer ride or winter setup, a 265/72R17 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.
Wheel fitment specs
The 2018 Toyota Tundra uses a 5x150 bolt pattern with a 110.1mm hub bore. Safe rim width range for the OEM tire is 7.5J â 8.5J, and offsets in the ET55 â ET65 window will clear suspension and fender without rubbing on most setups.
Tire pressure guidance
Manufacturer-recommended cold tire pressure for the 2018 Toyota Tundra is printed on the driver-side door jamb sticker â always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.
OEM Wheel & Tire Specs
Frequently Asked Questions
What tire size does the 2018 Toyota Tundra TRD Pro use?
The 2018 Toyota Tundra TRD Pro uses 275/65R18 tires as standard equipment.
What is the bolt pattern of the 2018 Toyota Tundra?
The 2018 Toyota Tundra has a 5x150 bolt pattern with a center bore of 110.1mm.
What is the wheel offset of the 2018 Toyota Tundra?
The 2018 Toyota Tundra has a wheel offset of ET60.
Other Vehicles with 5x150 Bolt Pattern
The following vehicles share the same 5x150 bolt pattern as the 2018 Toyota Tundra, making wheel interchangeability possible (verify offset and center bore before swapping).