1992 Yugo GV Base
The 1992 Yugo GV Base tire size and wheel specifications below reflect standard OEM reference fitment data for this trim level.
Detailed tire and wheel breakdown for the 1992 Yugo GV
Tire geometry â 145/80R13
The 145/80R13 fitted to the 1992 Yugo GV has a section width of 145mm and an aspect ratio of 80%, mounted on a 13-inch rim. That gives a sidewall height of 116.0mm (4.57") and an overall outside diameter of 562.2mm (22.13"). At highway speed this tire completes roughly 566 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.
Plus-sizing window
If you want to upsize wheels on the 1992 Yugo GV while keeping the speedometer accurate, target a 155/67R14 (plus-one). For a softer ride or winter setup, a 135/95R12 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.
Wheel fitment specs
The 1992 Yugo GV uses a 4x98 bolt pattern with a 58.1mm hub bore. Safe rim width range for the OEM tire is 4.0J â 5.0J, and offsets in the ET30 â ET40 window will clear suspension and fender without rubbing on most setups.
Tire pressure guidance
Manufacturer-recommended cold tire pressure for the 1992 Yugo GV is printed on the driver-side door jamb sticker â always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.
Fitment Specifications
| Engine & Trim | Tire Size | Rim Size | Offset (ET) |
|---|---|---|---|
| Base | 145/80R13 | 13" x 4.5 | ET35 |
Frequently Asked Questions
What tire size does the 1992 Yugo GV Base use?
The 1992 Yugo GV Base uses 145/80R13 tires as standard equipment.
What is the bolt pattern of the 1992 Yugo GV Base?
The 1992 Yugo GV Base has a 4x98 bolt pattern with a center bore of 58.1mm.
What is the wheel offset of the 1992 Yugo GV Base?
The 1992 Yugo GV Base has a wheel offset of ETET35.