The 2010 BMW M3 has a 5x120 bolt pattern, an OEM tire size of 245/40R18, and a 72.6mm center bore.

Other years of the BMW M3

2026 M32025 M32024 M32023 M32022 M32021 M32020 M32018 M32017 M32016 M32015 M32014 M32013 M32012 M32011 M32009 M32008 M32007 M32006 M32005 M32004 M32003 M32002 M32001 M32000 M3

2010 BMW M3 Engine & Trim Levels

V8 Coupe
Bolt Pattern5x120
Center Bore72.6
Stud SizeM 12x1.5
Advertisement

Detailed tire and wheel breakdown for the 2010 BMW M3

Tire geometry — 245/40R18

The 245/40R18 fitted to the 2010 BMW M3 has a section width of 245mm and an aspect ratio of 40%, mounted on a 18-inch rim. That gives a sidewall height of 98.0mm (3.86") and an overall outside diameter of 653.2mm (25.72"). At highway speed this tire completes roughly 487 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.

Plus-sizing window

If you want to upsize wheels on the 2010 BMW M3 while keeping the speedometer accurate, target a 255/33R19 (plus-one). For a softer ride or winter setup, a 235/47R17 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.

Wheel fitment specs

The 2010 BMW M3 uses a 5x120 bolt pattern with a 72.6mm hub bore. Safe rim width range for the OEM tire is 8.0J – 9.0J, and offsets in the ET24 – ET34 window will clear suspension and fender without rubbing on most setups.

Staggered setup notes

The 2010 BMW M3 ships staggered: 245/40R18 up front and 265/40R18 on the rear. That is a 265mm vs 245mm width difference — do not rotate front-to-rear, and replace tires in axle pairs to keep ABS and traction control balanced.

Tire pressure guidance

Manufacturer-recommended cold tire pressure for the 2010 BMW M3 is printed on the driver-side door jamb sticker — always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.

OEM Wheel & Tire Specs

Engine & TrimTire SizeRim SizeOffset (ET)
V8 Coupe
Rear: 265/40R18
18x8.5JET29

Frequently Asked Questions

What tire size does the 2010 BMW M3 V8 Coupe use?

The 2010 BMW M3 V8 Coupe uses 245/40R18 tires as standard equipment.

What is the bolt pattern of the 2010 BMW M3?

The 2010 BMW M3 has a 5x120 bolt pattern with a center bore of 72.6mm.

What is the wheel offset of the 2010 BMW M3?

The 2010 BMW M3 has a wheel offset of ET29.

Other Vehicles with 5x120 Bolt Pattern

The following vehicles share the same 5x120 bolt pattern as the 2010 BMW M3, making wheel interchangeability possible (verify offset and center bore before swapping).