The 2026 BMW M3 has a 5x112 bolt pattern, an OEM tire size of 275/35R19, and a 66.6mm center bore.

Other years of the BMW M3

2025 M32024 M32023 M32022 M32021 M32020 M32018 M32017 M32016 M32015 M32014 M32013 M32012 M32011 M32010 M32009 M32008 M32007 M32006 M32005 M32004 M32003 M32002 M32001 M32000 M3

2026 BMW M3 Engine & Trim Levels

Competition xDrive
Bolt Pattern5x112
Center Bore66.6
Stud SizeM 14x1.25
Advertisement

Detailed tire and wheel breakdown for the 2026 BMW M3

Tire geometry — 275/35R19

The 275/35R19 fitted to the 2026 BMW M3 has a section width of 275mm and an aspect ratio of 35%, mounted on a 19-inch rim. That gives a sidewall height of 96.3mm (3.79") and an overall outside diameter of 675.1mm (26.58"). At highway speed this tire completes roughly 472 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.

Plus-sizing window

If you want to upsize wheels on the 2026 BMW M3 while keeping the speedometer accurate, target a 285/29R20 (plus-one). For a softer ride or winter setup, a 265/41R18 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.

Wheel fitment specs

The 2026 BMW M3 uses a 5x112 bolt pattern with a 66.6mm hub bore. Safe rim width range for the OEM tire is 9.0J – 10.0J, and offsets in the ET15 – ET25 window will clear suspension and fender without rubbing on most setups.

Staggered setup notes

The 2026 BMW M3 ships staggered: 275/35R19 up front and 285/30R20 on the rear. That is a 285mm vs 275mm width difference — do not rotate front-to-rear, and replace tires in axle pairs to keep ABS and traction control balanced.

Tire pressure guidance

Manufacturer-recommended cold tire pressure for the 2026 BMW M3 is printed on the driver-side door jamb sticker — always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.

OEM Wheel & Tire Specs

Engine & TrimTire SizeRim SizeOffset (ET)
Competition xDrive
Rear: 285/30R20
19x9.5JET20

Frequently Asked Questions

What tire size does the 2026 BMW M3 Competition xDrive use?

The 2026 BMW M3 Competition xDrive uses 275/35R19 tires as standard equipment.

What is the bolt pattern of the 2026 BMW M3?

The 2026 BMW M3 has a 5x112 bolt pattern with a center bore of 66.6mm.

What is the wheel offset of the 2026 BMW M3?

The 2026 BMW M3 has a wheel offset of ET20.

Other Vehicles with 5x112 Bolt Pattern

The following vehicles share the same 5x112 bolt pattern as the 2026 BMW M3, making wheel interchangeability possible (verify offset and center bore before swapping).