The 1988 Tofaş Doğan has a 4x98 bolt pattern, an OEM tire size of 185/65R14, and a 58.1mm center bore.

Other years of the Tofaş Doğan

2002 Doğan2001 Doğan2000 Doğan1999 Doğan1998 Doğan1997 Doğan1996 Doğan1995 Doğan1994 Doğan1993 Doğan1992 Doğan1991 Doğan1990 Doğan1989 Doğan1987 Doğan1986 Doğan1985 Doğan1984 Doğan1983 Doğan1982 Doğan1981 Doğan

1988 Tofaş Doğan Engine & Trim Levels

SLX
Bolt Pattern4x98
Center Bore58.1
Stud SizeM 12x1.25
Advertisement

Detailed tire and wheel breakdown for the 1988 Tofaş Doğan

Tire geometry — 185/65R14

The 185/65R14 fitted to the 1988 Tofaş Doğan has a section width of 185mm and an aspect ratio of 65%, mounted on a 14-inch rim. That gives a sidewall height of 120.3mm (4.73") and an overall outside diameter of 596.1mm (23.47"). At highway speed this tire completes roughly 534 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.

Plus-sizing window

If you want to upsize wheels on the 1988 Tofaş Doğan while keeping the speedometer accurate, target a 195/55R15 (plus-one). For a softer ride or winter setup, a 175/76R13 (minus-one) keeps the overall diameter within ±3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.

Wheel fitment specs

The 1988 Tofaş Doğan uses a 4x98 bolt pattern with a 58.1mm hub bore. Safe rim width range for the OEM tire is 5.0J – 6.0J, and offsets in the ET30 – ET40 window will clear suspension and fender without rubbing on most setups.

Tire pressure guidance

Manufacturer-recommended cold tire pressure for the 1988 Tofaş Doğan is printed on the driver-side door jamb sticker — always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.

OEM Wheel & Tire Specs

Engine & TrimTire SizeRim SizeOffset (ET)
SLX14x5.5JET35

Frequently Asked Questions

What tire size does the 1988 Tofaş Doğan SLX use?

The 1988 Tofaş Doğan SLX uses 185/65R14 tires as standard equipment.

What is the bolt pattern of the 1988 Tofaş Doğan?

The 1988 Tofaş Doğan has a 4x98 bolt pattern with a center bore of 58.1mm.

What is the wheel offset of the 1988 Tofaş Doğan?

The 1988 Tofaş Doğan has a wheel offset of ET35.

Other Vehicles with 4x98 Bolt Pattern

The following vehicles share the same 4x98 bolt pattern as the 1988 Tofaş Doğan, making wheel interchangeability possible (verify offset and center bore before swapping).