1988 Tofaş Doğan SLX
The 1988 Tofaş Doğan SLX tire size and wheel specifications below reflect standard OEM reference fitment data for this trim level.
Detailed tire and wheel breakdown for the 1988 Tofaş Doğan
Tire geometry — 185/65R14
The 185/65R14 fitted to the 1988 Tofaş Doğan has a section width of 185mm and an aspect ratio of 65%, mounted on a 14-inch rim. That gives a sidewall height of 120.3mm (4.73") and an overall outside diameter of 596.1mm (23.47"). At highway speed this tire completes roughly 534 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.
Plus-sizing window
If you want to upsize wheels on the 1988 Tofaş Doğan while keeping the speedometer accurate, target a 195/55R15 (plus-one). For a softer ride or winter setup, a 175/76R13 (minus-one) keeps the overall diameter within ±3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.
Wheel fitment specs
The 1988 Tofaş Doğan uses a 4x98 bolt pattern with a 58.1mm hub bore. Safe rim width range for the OEM tire is 5.0J – 6.0J, and offsets in the ET30 – ET40 window will clear suspension and fender without rubbing on most setups.
Tire pressure guidance
Manufacturer-recommended cold tire pressure for the 1988 Tofaş Doğan is printed on the driver-side door jamb sticker — always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.
Fitment Specifications
| Engine & Trim | Tire Size | Rim Size | Offset (ET) |
|---|---|---|---|
| SLX | 185/65R14 | 14" x 5.5 | ET35 |
Frequently Asked Questions
What tire size does the 1988 Tofaş Doğan SLX use?
The 1988 Tofaş Doğan SLX uses 185/65R14 tires as standard equipment.
What is the bolt pattern of the 1988 Tofaş Doğan SLX?
The 1988 Tofaş Doğan SLX has a 4x98 bolt pattern with a center bore of 58.1mm.
What is the wheel offset of the 1988 Tofaş Doğan SLX?
The 1988 Tofaş Doğan SLX has a wheel offset of ETET35.